The CDN-T8SE could be referred to as a “dual-threat”
network, as it can be used either as a CDN for conducted
immunity testing per IEC 61000-4-6, or as an ISN for
conducted emissions testing per CISPR 22/32. It meets
all applicable requirements of these standards for each
test, as well as those contained within CISPR 16-1-2.
Com-Power ISN và CDN mã CDN-T8SE đáp ứng IEC/EN 61000-4-6 , CISPR 16-1-2 và CISPR 22/32
CDN-T8SE được sử dụng cho các phép thử phát xạ dẫn (conducted emissions) hoặc miễn nhiễm dẫn (conducted immunity) trên các thiết bị có dây dẫn được che chắn (shielded/screened) với tối đa bốn cặp cân bằng.
BÁO GIÁ SẢN PHẨM
Com-Power ISN và CDN mã CDN-T8SE đáp ứng IEC/EN 61000-4-6 , CISPR 16-1-2 và CISPR 22/32
- Product Name: Coupling Decoupling Network (CDN)
- Compliant Test Standards: IEC / EN 61000-4-6
- Application: Four screened, balanced pairs
- Frequency Range: 150 kHz to 230 MHz
- RF Input Voltage: 40 V (Max)
- RF Input Connector: 50 Ω BNC (Female)
- Voltage Rating: 124 V AC / 125 V DC (Line to Ground)
- Current Rating: 1.5 Amp (Max)
- AE and EUT Connections: 50 Ohm Female BNC
- Common Mode Impedance:
- 150 kHz – 26 MHz: 150Ω ± 20Ω
- 26 MHz – 80 MHz: 150Ω + 60Ω / – 45Ω
- 80 MHz – 230 MHz: 150Ω + 60Ω / – 60Ω
- Voltage Division Factor: 9.5 dB +1.5/ -0.5
- Decoupling of Common Mode Disturbance:
- 150 KHz ≥ 45dB (RF/AE)
- 500 KHz ≥ 50dB (RF/AE)
- 230 MHz ≥ 50dB (RF/AE)
- Dimensions: 8.5 x 4.5 x 3.5 inches or 21.5 x 11.4 x 8.8 cm
- Weight: 2 lbs. or 0.9 kg
- Accessories Available from Com-Power for setting test levels and running the test:
- ADA-T8SE shorting adapters
- ADA-515-2 150 Ω to 50 Ω adapters
- TEP-050 50 Ω Terminator
- ATTN-6-100W Power Attenuator
- DCU-300-100W Directional Coupler
- ASC series Power Amplifier
